Making the system settings
■
34
■
GSM OFF
GSM not initialised
GSM PIN rejected
GSM SIM access prob.
GSM PIN error
Connecting
Connection failed
GSM connected to network 3/5
GSM missing
0
4
3
OK
Used to identify the name of the strongest GSM network at the installation, find out the status of
the GSM line, make SIM card settings and send a test alarm SMS to the 1
st
number.
34 GSM settings
To find out the status of the GSM network at any time.
List of order of messages:
340 GSM module status
4
3
OK
There is a power failure.
(fleeting message)
A new PIN must be entered.
The number from 0 to 5 indicates network strength,
with 5/5 being maximum strength.
No GSM module detected.
The SMS sent will be “SMS sending test
“
.
Sending test OK
2
4
3
OK
To check correct sending of a test SMS by GSM. This test will be sent to the 1
st
SMS number stored
(see menu 3111).
342 SMS sending test by GSM
Before the SIM card is inserted into the GSM module on
the phone dialer, the name of the operator with the
strongest signal will be displayed.
Once the SIM card has been inserted and a valid PIN
entered, the name of the SIM card operator will be
displayed.
The PUK is erased.
Operator name
3
4
3
OK
To check the operator’s name.
343 GSM operator name
XXXX
4
4
3
OK
Enter the 4-digit PIN shown on the subscription contract, if the PIN is activated on the SIM card.
If you enter the PIN incorrectly 3 times, find out the PUK from the SIM card support card, or ask your
GSM operator for it so that you can unlock the SIM card.
344 PIN entry
XXXX
5
4
3
OK
The PUK should only be entered if the SIM card is locked.
Enter the PUK given to you by your GSM operator.
345 PUK entry
Used to set the length of time in minutes (between 0 and 240 minutes) after which you wish to be
alerted by SMS by the fixed line or IP (if you have opened an account).
15
(15 minutes by default);
the message sent will be
“
GSM network fault
“
Function deactivated.
341 GSM network lost
15
1
4
3
OK
0
OK
To receive an automatic SMS at midday by GSM confirming satisfactory operation of the GSM function.
Only the 1
st
SMS number will be alerted.
Enter the number of days between 1 and 240 days
(14 days
by default)
. The SMS sent will be “GSM periodic test
“
.
No GSM periodic test
346 GSM periodic test
14
6
4
3
OK
0
OK
Erased
or
0
OK
