■
47
■
Remote settings via telephone
Connect to the phone dialer from a telephone outside the dwelling: proceed as described on page 45. If the code is correct,
the phone dialer specifies the system status; otherwise it hangs up.
No entries are accepted while a voice message is being issued.
Making settings remotely via telephone is particularly recommended if settings are changed later after initial installation.
The “ Remote settings via telephone “ function is only guaranteed for France Telecom lines.
It is only possible if your customer agrees. The customer must have entered OFF + user code 1 on his/her LCD
keypad before you enter your installer code remotely.
Type of stored message
Category +
Group
Alarm
or
Battery low
or
Radio link lost
AD
Zone A -
With delay
A
Zone A - Immediate
B
Zone B - Immediate
C
Zone C - Immediate
SYS
System (keypads, sirens, phone dialer, disconnected IP camera)
TEC
Technical (smoke, water leakage or power detectors)
Viewing stored information when the orange
indicator flashes on the LCD keypad
To erase the stored faults and switch off the orange indicator on a keypad, fully arm the alarm and then disarm it
using that keypad, or go to menu 72 “Fault erasing“.
The battery and radio link lost faults will reappear if they have not been corrected.
On the LCD keypad
If a fault is detected,
the orange indicator flashes
and the fault is indicated on the screen.
Enter the log, type in the installer code, press
and view menu
5
“Device list“ for more
information.
The character
is the separator, and the character # is used to confirm.
Setting
Select
menu
Entry of setting
(format/example)
Voice message (example) / Action
Record the date and time
1
DDMMYYYYHHMM#
e.g.: 120620080926#
your entry is one, asterisk, one, two, zero, six, two, ...
hash
Record
a phone number
2
1
type the number
(max. 15 digits)
e.g.: 0723456789
#
First alarm phone number
2
#
Second alarm phone number
3
#
Third alarm phone number
4
#
Fourth alarm phone number
x
#
Erases the number stored under phone number “x“
Record a welcome message
3
“This call is from Mr Dupont’s
alarm system...“
#
Listen to the recorded message
Listen to the recorded message
4
Listen to the recorded message
Customise the installer code
5
0
type the
4-digit code
#
Entry of the installer code
Customise the user code
1
#
Entry of the user code
