SOMFY ILMO 2 40 WT, Instructions Manual

Page: 19 / 24

17
EN
Copyright © 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
ILMO 2 40 WT
2. 4. 2. Restoring the original configuration
2. 4. 2. 1. Using the control point connected to the roller shutter
Follow each of the 4 steps in the procedure carefully to correctly restore the original configuration.
1)
Place the roller shutter in the mid-height position.
2)
Repeat the next step 3 times in succession:
- Press the Up button until the roller shutter moves. Release the
button immediately.
3)
Repeat the next step twice in succession:
-
Press the Down button until the roller shutter moves. Release
the button immediately.
4)
Press the Down button again until the roller shutter makes
2 successive movements in the same direction.
- The motorisation is reset to the original configuration.
2. 4. 2. 2. Using the wired electronic motor setting tool
- Press the Up and Down buttons on the setting tool at the same
time until the roller shutter makes two successive up and down
movements.
-
The drive has been restored with the original configuration.
1 2
x 3
3 4
x 2
7s
3. USE AND MAINTENANCE
This drive is maintenance-free
3. 1. RAISING AND LOWERING THE ROLLER SHUTTER
1)
Press the “Up” button:
- The roller shutter rises and stops at the top stop without
requiring adjustment.
2)
Press the “Down” button:
- The roller shutter descends and stops at the bottom stop
without requiring adjustment.
3. 2. OBSTACLE DETECTION
The automatic obstacle detection function protects the roller
shutter and enables obstacles to be cleared:
-
If the roller shutter meets an obstacle when lowered, it stops
automatically:
-
Press the Up button to release the roller shutter.
-
If the roller shutter meets an obstacle when raised, it stops
automatically:
-
Press the Down button to release the roller shutter.
1 2