6
Copyright © 2015 Somfy SAS. All rights reserved - V1 - 02/2015
2.1.3. drive/tube assembly
1) Slide the drive into the roller tube.
For roller tubes which are smooth
inside, position the notch previously
cut on the boss on the crown.
2) Fix the tube to the motor with self-
tapping screws or steel pop rivets
depending on the dimension (L).
The screws or pop rivets must
only be attached to the drive
wheel and not to the drive.
2.1.4. installing the drive/tube assembly
Install and fix the drive/tube
assembly onto the end bracket (
f
)
and onto the drive bracket (
g
) :
2.2 WiriNg
Cables which pass through a metal wall must be protected and
isolated using a sheath or sleeve.
Attach cables to prevent any contact with moving parts.
The cable for the Roll Up 28 WT cannot be removed. If it is damaged,
return the drive to the After-Sales department.
L
1
2
g
f
