15
FR
FR
- Remplacement du boîtier électronique EXAVIA 500 / WISPA 800 / SGS 201SGS 400 / SGS 501 - SOMFY
Voir page 8.
9.4 Ajouter une télécommande 2 ou 4 touches
9.1 Présentation des télécommandes
9.2 Possibilités de programmation de la télécommande 2 touches
9.3 Possibilités de programmation de la télécommande 4 touches
Les télécommandes RTS Somfy peuvent commander, selon les choix de paramétrage :
•
l’ouverture totale du portail
•
l’ouverture piétonne du portail
•
un autre équipement Somfy RTS (exemple : moteur de porte de garage, volet
roulant, etc.)
1
2
3
4
1
2
Télécommande
2 touches
Télécommande
4 touches
Touche
1
Touche
2
Possibilité 1
Ouverture totale
Ouverture piétonne ou autre automatisme Somfy RTS
Possibilité 2
Autre équipement Somfy RTS
Ouverture totale
Touche
1
Touche
2
Touche
3
Touche
4
Possibilité 1
Ouverture totale
Ouverture piétonne ou autre
automatisme Somfy RTS
Autre automatisme Somfy
RTS
Autre automatisme Somfy
RTS
Possibilité 2
Autre automatisme Somfy
RTS
Ouverture totale
Ouverture piétonne ou autre
automatisme Somfy RTS
Autre automatisme Somfy
RTS
Possibilité 3
Autre automatisme Somfy
RTS
Autre automatisme Somfy
RTS
Ouverture totale
Ouverture piétonne ou autre
automatisme Somfy RTS
Possibilité 4
Autre automatisme Somfy
RTS
Autre automatisme Somfy
RTS
Autre automatisme Somfy
RTS
Ouverture totale
9.6 Supprimer les télécommandes
9.5 Ajouter une télécommande 3 touches
Voir “ Effacer les réglages et les télécommandes mémorisées” page 17.
PROGRAMMATION DES TÉLÉCOMMANDES 9
Vous pouvez mémoriser jusqu’à 16 points de commande (télécommandes, autre point de commande radio).
Si vous mémorisez un 17ème point de commande, le premier mémorisé sera automatiquement effacé.
Si vous souhaitez programmer une ouverture piétonne, elle doit forcément être programmée sur la touche suivant celle de l’ouverture
totale (ex : ouverture totale commandée par la touche 2, ouverture piétonne commandée par la touche 3).
La programmation de l’ouverture piétonne sur la touche 1 des télécommandes est impossible.
1
2
3
>2s
<0,5s
Appuyer 2 s sur le bouton
de l’électronique
de commande.
Le voyant s’allume.
Poser la nouvelle télécommande à
programmer sur la cible de l’électronique de
commande.
Faire un appui bref sur une touche de la
télécommande à programmer. Le voyant
“RADIO” s’allume puis s’éteint lorsque vous
relâchez la touche de la télécommande.
La télécommande est mémorisée.