EN
Dexxo Pro io
4
Copyright © 2015 SOMFY ACTIVITES SA. All rights reserved
General stop
General closure
Interrupted motion
Movement not performed
> Using Keygo or similar remote controls
Open
Close
Stop
> Obstacle detection operation
The detection of an obstacle during door opening will stop the door and cause it to
reopen slightly to clear the obstacle
:KHQDQREVWDFOHLVGHWHFWHGGXULQJWKHFORVHF\FOHWKHGRRUZLOOVWRSDQG
then reopen
2QFHDQREVWDFOHKDVEHHQGHWHFWHGWKHOLJKWZLOOÀDVKIRUVHFRQGV
> Light operation
The light will come on each time the motor drive unit is operated. The light will
go out one minute after the door stops moving.
Repetitive use that causes the light to be continually on may result in a thermal
cut out.
> Manual release cord operation
'H[[R3URLV¿WWHGZLWKDPDQXDOUHOHDVHPHFKDQLVPVRWKDW\RXFDQPRYHWKH
door manually should a power failure occur, for example. The manual release
mechanism should be easily accessible and located no more than 1.80 metres
DERYHÀRRUOHYHO
[1].
'LVHQJDJLQJWKHPRWRUGULYHPHFKDQLVP
Pull on the manual release cord until the door drive mechanism is
disengaged.
[2].
Manually moving the door
This is possible as long as the door drive mechanism is disengaged.
[3]. Reengaging the motor drive mechanism
Move the door manually until the drive mechanism comes to reengage
itself into the transmission rail.
When disengaging the motor drive mechanism, use caution for a
badly balanced door may cause sudden door movement
that may be dangerous.
Only use the cord to disengage the motor drive mechanism. Never
use the cord to move the door manually.
