SOMFY Dexxo Pro 1000 io, Manual

Page: 21 / 24

7
EN
23
Partial opening operation with a Keygo remote control
If this option is validated:
• Pressing a remote control button programmed for partial opening causes the door to open partially (Fig. 21) .
• Pressing the remote control button programmed for full opening causes the door to open fully (Fig. 22) .
The partial open position can only be achieved if the door is previously closed.
21
22
Automatic closure mode operation
The door is automatically closed after a time delay set at the time of installation.
An additional command during this time will cancel the automatic closure and the door will remain open.
The next command will close the door.
Working from the back-up battery
If a back-up battery is installed, the Dexxo Pro motor will operate when a power cut occurs.
The following conditions apply to operation:
• Door speed is reduced.
• The light will not come on.
• The safety devices are disabled.
Battery specifications:
• Endurance: The battery will last for 12 hours with a maximum of 1 to 3 operating cycles depending on the weight of the door.
• Recharging time: 48 hours.
• Service life prior to replacement: approx. three years.
To ensure optimum battery life, we recommend that the power to the motor is switched off and the door is operated for a number of cycles using
battery power (three times a year).
Forced operation mode (Fig. 23)
This function is used to move the door at any time (remote control lost, safety mechanism failure, etc.).
Remove the built-in lighting cover:
• Control door motion using the “ + ” and “ - ” buttons.
• Pressing and holding the “ - ” button will trigger closure.
• Pressing and holding the “ + ” button will trigger opening.
Operation after a power outage
After a power outage, the next time the door is moved, it must be opened completely. Always allow the door to open fully.