4.2.5 OFF mode
In this operating mode, only manual commands are carried out.
– Switching to OFF mode
Press the “
+
“ on the
button briefly
➜
display shows OFF.
– Switching from OFF mode to automatic mode
Press the “
-
“ on the
button briefly
➜
display shows the time.
+
-
+
-
We reserve the right to make changes due to technical improvements.
5
Chronis RTS/RTS L
It is possible to operate the system manually at any time using the UP, DOWN and STOP/IP buttons.
Commands:
Pressing the UP or DOWN direction buttons will move the blind in the desired direction.
STOP command:
While the motor is running, a command can be stopped by pressing the STOP/IP button.
Depending on the receiver used, an intermediate position (IP) can also be called up using this button.
Chronis RTS/RTS L
is powered by two standard 1.5 V alkaline manganese batteries (Micro/AAA type).
Battery life is approx. 3 years with an average of 4 commands per day. As the battery power decrea-
ses, the display contrast will fade. If the display is illegible, the batteries must be changed.
Changing the batteries:
– Carefully remove the cover of the Chronis RTS/RTS L using a small screwdriver (for RTS L, first dis-
connect the light sensor).
– Slide the Chronis RTS/RTS L unit upwards out of the mounting plate.
– Change the dead batteries, which are located on the back of the Chronis RTS/RTS L unit. Observe the polarity specified on the
unit!
– Please dispose of the dead batteries at an appropriate collection point.
After changing the batteries, the date and time must be reset.
The switching time settings will be stored permanently.
5
Manual operation
6
Battery
