2.1
We reserve the right to make changes due to technical improvements.
Chronis RTS/RTS L
2
Assembly
1.) Fix wall mounting
plate to the wall
using two screws
3.) Place the cover.
2.) Slide the Chronis
RTS/RTS L onto
the wall mounting
plate from above
The range of radio control is limited by laws regulating radio devices and by building design. When planning, please ensure that there is adequate radio
reception.
In order not to affect quality of reception, a minimum distance of 30 cm between a Chronis RTS/RTS L unit and a radio receiver should be maintained.
Chronis RTS/RTS L should not be installed in the immediate vicinity of metal surfaces. Powerful local transmitter equipment (e.g. cordless headphones)
with a transmission frequency identical to the Chronis RTS/RTS L can affect its function.
Insulating strip
The equipment is delivered with the batteries installed.
An insulating strip is placed between the battery pole and the contact.
This must be removed before installation, then the time is shown on the display.
Cover
Chronis RTS / RTS L
Wall mounting plate
Tip: Before assembly, check that there is adequate radio reception at the intended location.
Programming button
The procedure for tuning a Chronis RTS to a radio receiver depends on the type of recei-
ver used. It is important to follow step by step the detailed description of the relevant
programming procedure in the instructions which accompany each individual SOMFY
RTS radio receiver.
– Activate your chosen receiver (please refer to the installation guide of the relevant receiver).
– Press the programming button on the Chronis RTS/RTS L.
– “Prog” will appear on the display. Hold down the button until the RTS receiver confirms the tuning process.
2
Installation:
3
Radio programming:
4.2
Setting operation mode
3.1
Tuning
