6
■
Operating
information
(cont’)
Cycle counters
Tens and units
Thousands and hundreds
Hundred and tens of thousands
Accessories
consumption
Power consumed in Watts (from 00 to 99)
Log of the last
10 faults
....
: see faults codes above.
To clear the fault codes, select the parameter
press and hold the
button for 3 seconds until
dashes appear
.
For the fault codes from
to
:
Once the fault is corrected, there is no need to clear
the log fault code to return to normal operation.
For defect codes from
to
:
Once the fault is corrected, you must
clear the log defect code to return to
normal operation.
....
Functioning Modes
Automatic Mode (safety accessories are required)
Semi-Automatic Mode
Sequential Mode
Sequential Mode +Time out
(safety accessories are required)
3-buttons Mode (Up - Stop - Down)
Forced mode (Safety devices are deactivated)
= 00
01
02
03
04
05
Security Input 1
(Safety Edge)
No safety edge connected
Active when opening the door
Active when closing the door
Active when closing the door + prevents the door
opening
Contact for connecting an emergency stop device
= 00
01
02
03
04
Security Input 2
(Photocells)
No accessory connected
Active when opening the door
Active when closing the door
Active when closing the door + prevents the door
opening
Contact for connecting an emergency stop device
= 00
01
02
03
04
■
Parameter list
