24
n
Subsequent remote control addition
Using your SGA/AXOVIA
All the recorded parameters are deleted : recorded remote control, gate displacement,
functioning mode...
• Press 7 seconds on reset button.
> While pushing, the four lights turn on.
1
English
• Release the reset button.
> The four lights go off for 2 seconds
> The ON/OFF light turns back on
> The PROG light turns on
2
Using your SGA/AXOVIA
o
Securization of parametering
Push on the complete opening button
Push a second time on the button so that both leaves stop at mid opening
Cut off the mains supply 5 seconds
Turn back on the mains supply
Push on the complete opening button
The leaves MUST start up in the opening direction.
5
4
3
2
1
n
Deleting emitters
For a subsequent addition of remote controls, redo the following operations :
• Memorization of the remote controls.
• Memorization of gate leaf displacement.
Any new remote control memorization cancels and replaces the
preceding program of gate displacement
In order to return to the sequential mode (the AUTO light is lit) :
• Place the remote control on the target engraved on the hood.
• Push on key of remote control until the AUTO light goes off.
>The normal mode (sequential functioning) is active.
n
Going from auto mode to normal mode:
Lights
Reset button