Risk of Injury
During commissioning and adjustment ensure that persons and
objects remain outside the range of movement of the door.
Advice:
Permanent light can heat up the cover of the drive lighting unit
Therefore carry out commissioning without the cover.
■
Connect to power supply, drive light is permanently on.
■
Check whether the driver is engaged in the chain; garage door must not be able
to be moved manually.
13
Adjustment Instructions
SOMFY Garage Door Drive AXORN 65/85
Procedure involves adjustment of the upper and lower end stops as well as a test
run. Adjustment procedure must be carried out in the recommended sequence and
is complete when the drive light goes out.
Only then can the handsset signal be received.
Operating Elements for Electronic Unit
F Lighting diode, lights on reciept of a signal
U Lighting diode, lights up at pre - set voltage
a Operating Key
b Programming Key
Commissioning
End Position of
Garage Door
Setting/ Alteration
