EN
CONTROL BOX 3S RTS
4
Copyright
©
2017 SOMFY ACTIVITES SA. All rights reserved.
3.3. Adding remote controls
3.3.1. 2- or 4-button remote controls
Copying the function from a memorised button on a 2- or 4-button remote
control to a button on a new 2- or 4-button remote control:
B
A
A
Remote control "A" = "source" remote control already memorised
Remote control "B" = "target" remote control to be memorised
For example, if the button on remote control A opens the gate fully, the
button on the new remote control (B) will also open the gate fully.
3.3.2. 3-button remote controls
Copying the function from a memorised button on a 3-button remote con-
trol to a new 3-button remote control:
A
B
2s
< 1s
For example, if remote control A operates the gate's remote lighting, the
new remote control (B) will also operate the gate's remote lighting.
4. MAINTENANCE
4.1. Checks
4.1.1. Safety devices (cells, safety edge)
Check for correct operation every 6 months.
4.1.2. Backup battery
For optimum battery life, it is recommended that the main power supply be
switched off and the motor operated using the battery for several cycles,
three times a year. Contact a qualified person (installer) to have the backup
battery replaced.
4.2. Replacing the battery
4.2.1. Keytis RTS
3V
CR 2430
+
3V
CR 2430
+
3V
CR 2430
+
4.2.2. Keygo RTS
C
R
2430
C
R
2430
C
R
2430
5. TECHNICAL DATA
Power supply
220-230 V - 50/60Hz
Max. power consumption
800 W (with 500 W remote lighting)
Climatic operating conditions
- 20°C/+ 60°C - IP 44
Radio frequency
433.42 MHz
< 10 mW
Number of memorisable chan-
nels
40
Remote lighting output
230 V - 500 W (Halogen or incan-
descent only)
