9
Rollixo io
3
4
2
1
Prog
STOP
3
4
2
1
Prog
STOP
Locking/unlocking the programming buttons
The programming buttons
must
be locked to guarantee the safety of the users. If the programming
buttons are locked, the following functions cannot be used:
n
access to programming mode by pressing the Prog button of the receiver
n
access to setting mode for the end points of the motor by pressing the buttons and the receiver at the
same time
n
setting the work modes.
Lock programming buttons
Unlock programming buttons
To unlock the programming buttons, repeat the abovementioned locking procedure.
At the same time press the STOP and
Prog button of the receiver until...
...all LEDS flash.
The programming buttons are
now locked.
Dipswitch information
Dipswitch
Possible setting
ON
OFF
1
Self-test photocells
Activated
Deactivated
2
Choice of cell type
Photoelectric
Reflection
3
2 s warning indication light
Activated
Deactivated
4
Selection of type of wired protection
Resistance
Optical
5
Setting holiday mode
See standard installation manual
part 9.4
6
Do not use
3
4
2
1
Prog
STOP
Rollixo io
