3
Rollixo io
No. Description
Function
1
UP button
Opens the door
2
STOP button
Stops the door
3
DOWN button
Closes the door
4
PROG button
Programming the remote co safety edge transmitter
5
PROG LED
Information about radio reception and programming the
transmitters
6
Motor and
safety brake LED
Information about the status of the motor and safety
brake
7
Safety edge LED Information about the status of the safety edge and
safety edge transmitter
8
Battery LED
Information about the status of the wireless safety edge
transmitter battery
9
Photocells LED
Information about the status of the cells
Description of the interface for external programming
3
4
2
1
Prog
STOP
1
2
3
6 7 8
9
5
4
Fixation of the Rollixo receiver
Installation
Make sure there is a plug socket at a suitable distance (mains cable supplied = 2 m).
We advise installing the receiver on the same side of the door as the safety edge transmitter.
Remove the flush
lighting cover.
Unscrew the receiver
cover and remove it.
Mark the drill holes.
Fix the receiver to the
wall.
Motor connection
The receiver may not be connected to the mains supply during the connection of the motor.
L1
L2
N
M
1
2
3
4
Connect the motor to the receiver.
Note: The Rollixo can only control 1 motor and may
not be connected parallel
The motor cable must absolutely
be laid in the receiver’s 230 V insulated
zone.
230 V geïsoleerde zone
24 V geïsoleerde zone
Yellow/green
Brown
Blue
Black
24 V insulated zone
230 V insulated zone