19
chimney cleaning to prevent possible fires in the chimney. If you are using wet or green firewood, the
combustion control should always be more open to ensure proper combustion.
Radiant heating
It is emitted by the embers, the steel plate and the vermiculite plates on the back of the stove. The
radiant heating is also transmitted through the glass to the compartment and heats the area in front
of the stove.
Convection heating
Cold air passes through the crankcase from the bottom, running across the back and top of the
equipment, expelling hot air from the front of the equipment.
This convective hot air reaches the far corners of the room.
Figure 29 - Convection circuit represented in the stove
6.4. Air control
Combustion air control
The combustion air regulator is shown in Figure 30. It controls the amount of air entering the
salamander, thus controlling the burning of the fuel. On the side of the salamander there is 1
regulator that regulates the primary and secondary air at the same time.
Primary air
Secondary air
Glass
cleaning
Outside air inlet
Outside air inlet
Outside air inlet
Fume outlet
Fume outlet
Color legend:
Warm air
Preheated air
Cold air
