11
• Finally, secure the 4 screws. The device is now securely sealed and ready to be mounted.
• Before you close the device case, you need to check to ensure that O-ring of the case is in place.
Mind the position of the safety pillars, there is only one way for the case to close correctly and
comply with the IP rating (observe Pictures 11 and 12).
5.3. CONNECTION TO NMS (NETWORK MANAGEMENT SERVER)
•
The device is configured in such a way that when you insert the batteries, the device automatically
begins with the activation process to connect to the NMS (Network Management Server) and
AMS (Application Management Server).
• Connection, registration and communication with the base station, and further on with NMS and
AMS shall be proceeded according to the instructions of BS/NMS/AMS provider.
Pictures 11 and 12: Closing the case
• If you have only one cable connected to the ComBox.L device, then it is very important to seal
second connector with the enclosed plug. With this plug we are ensuring IP67 protection. For
installation, please see pictures below (Pictures 8, 9 and 10)
Pictures 8, 9 and 10: Cable Connection
