background image

  This appliance can be used by children aged from 8 years and above and persons with reduced 

  physical, sensory or mental capabilities or lack of experience and knowledge if they have been 
  given instruction concerning use of the appliance in a safe way or are supervised and 
  understand the hazards involved.

  Children shall not play with the appliance.

  Cleaning and user maintenance shall not be carried out by children without supervision. 

  Children of less than 3 years should be kept away from the appliance unless continuously supervised. 

  Children aged from 3 years to 8 years shall only switch on/off the appliance provided that it 

  has been placed or installed in its intended normal operating position and they have been given 
  instruction concerning use of the appliance in a safe way or are supervised and understand the 
  hazards involved.

  Children aged over 3 and less than 8 years shall not plug in, regulate, clean nor maintain the 

  appliance.

  Children of any age should not be permitted to play with the appliance or its controls.

  If the supply cord is damaged, switch off the mains power at the wall socket immediately. It must 

  be replaced by the manufacturer, its service agent or a similarly qualified person in order to 
  avoid a hazard.

  Do not use the appliance in rooms with explosive gas (e.g. petrol) or while using inflammable glue 

  or solvent (e.g. when gluing or varnishing parquet floors, PVC etc.)

  Do not insert any objects into the appliance.

  This appliance must be connected to a 220/240V AC 50Hz supply.

04

Remote Control Battery Warning:

Only adults should handle the batteries. Do not allow a child to use the remote control unless the 
battery cover is securely attached to the battery compartment. All batteries must be disposed of 
at your local recycling point. 
Box Contents:
Please check that the following components are included within the box. If anything is missing or 
damaged, please contact the retailer and do not use the appliance until you have everything.

  Appliance with trailing kettle-type socket.

  Kettle-type lead with moulded 13 Amp plug.

  Remote control hand set.

  Stability/fixing system.

  Instruction manual.

Summary of Contents for SLE40i





















Reviews: