09
F. Drill 2.5mm diameter x 10mm deep holes at the marked locations.
G. Insert the screws through the mounting bracket and screw into the holes. Tighten the screws
securely. Fig. 8.
H. Hold the appliance up to ensure it will fit into the frame. Use at least 4 screws (provided) to lock
the appliance into the wall mounting brackets. Fig. 9.
E. Install mounting bracket by aligning the edge 6.4mm from the centre of the wall sides and
156mm from the bottom of the wall sides. Fig. 6
Use a pencil to mark through the holes on the wall brackets. Fig. 7
Summary of Contents for SLE125t
Page 19: ...19 Exploded View ...
Page 23: ...23 Notes ...
