ECE-25 / ECE-50 / ECE-100 / ECE-150
*ECE-25:89103;ECE-50:89102;ECE-100:
89106; ECE-150:89106 2 UNITS.
ASSEMBLING THE SOLAR PANEL
A solar panel is available as an accessory of the ECB-12 electric fencer in order to re-
charge the battery.
Two angles are supplied to affix the panel wich are held on the side of the electric fencer
box with two screws and on the solar panel with another two, wich are supplied with the kit.
When using the solar panel we recommend regulary checking the battery acid level, ad-
ding distilled water if necessary. If subject to many hours of sunlight we recommend mo-
ving the solar panel so that it does not directly face the sun.
ASSEMBLING THE ELECTRIC FENCER
To install the fence correctly we recommend using high quality insulators, this will avoid
power losses which will affect the performance of the energizer.
Build a fence to the required size, however do NOT exceed the maximum sizes recom-
mended for each energizer model. Galvanized wire or flexible wire may be used if the
cable has not to be moved often. Pay special attention to wire connections. Do not use
rusty wire.
Nº
Description
Code
1
Gland
77452
2
Negative terminal
89304
3
Positive terminal
89303
4
Condenser
*
5
Control circuit
89100
6
High voltage transformer
-
7
Pilot light
74902
SOLTER
SOLDADURA S.L.
3