MENU OPERATIONS
To access the machine menu press key 17
, and select the
desired menu with the main control. Press the same selector
lightly to access the different parameters of the submenu and view
or change the value. To exit from this menu press same key
again.
The SET submenu has different parameters depending on the
type of welding chosen.
See "SETTINGS" submenu in welding operation section for each
type of proces.
PROGRAM MEMORY MANAGEMENT
The machine can store any program in memory
with all data, both primary and secondary.
To manage the reading or writing of these pro-
grams, select the program menu (enter menu mode
and select "Pro"). After that, you can choose bet-
ween the options “read a program (L-P)” or “save a
program (S-P)”. Having selected the option, select
the program number with the main control and con-
firm the action by pressing the same selector.
The recovered data can be edited and will be saved as the current program, but the original program in the memory
will not be changed, being safeguarded from accidental changes.
DATA MENU
Enter menu mode and select:
:
Con:
Wire consumption in meters and centimeters.
rSt:
Reset wire consumption.
LAb:
Welding work hours. It is displayed in hours and minutes
(hhhh.mm).
SoL
: Last welding average values in amps and volts.
Lut:
Version of MIG / MAG synergic data base.
Pur:
Firmware version of power unit.
uir
: Firmware version of control panel.
SOLTER
SOLDADURA S.L.
AEROPROCESS
11
