20
SECTION 2: INSTALLATION AND SETUP
Discover method
1. After logging into the NVR as an administrator, click the
Settings
option in the header of the screen.
2. In the right pane, click the
Add New
button to open the drop down list, then click
Discover
.
3. On the following screen, click the
Start Discover
button in the page header.
4. For each camera discovered on the network, check the select box to the left of the IP address, then enter the appropriate
information required in the configuration menu as described above. If the device is password protected, click the checkbox (see
below), then scroll down to enter the username and password information required.
PRELIMINARY
Summary of Contents for SLS-ENVR Series
Page 6: ...vi NOTES PRELIMINARY...
