19
SLS-ENVR Series NVR V2.1 User Manual
SECTION 2: INSTALLATION AND SETUP
b.
Brand
. Open the drop-down list and select the brand of the device you are adding. If the device is ONVIF compatible,
select
ONVIF.
c.
Model
. Open the drop-down list and select the model of the brand you are adding. In the example above with the ONVIF
brand, only one option, GENERIC, is selectable. Here, click GENERIC to select it.
d.
Device Name
. Enter a device name. The device name can be composed of alpha-numeric characters.
e.
Device identification
. Enter an identification for the device. The identification code must be composed of alpha-
numeric characters.
f.
HTTP
and
RSTP
ports. Change the port numbers if necessary.
g.
Device is password protected
. If the device requires a user name and password to login, check this box, include the
username and password information in the sections below to administer and view the device, and select the bullet for
Use administrator account
.
4. After all information on the screen is entered, click the
Add Devices
button in the lower right corner. If the addition was
successful, the following pop-up window will open, and a dot will appear under the device name as shown below. If it was not
successful, an error expression will be shown.
PRELIMINARY
Summary of Contents for SLS-ENVR Series
Page 6: ...vi NOTES PRELIMINARY...
