UM0012_ASW 5-10k Series_EN_V03_0522 33
Procedure:
1. Loosen the gland of the connector. Insert the crimped conductors into the
corresponding terminals and tighten screws with a screwdriver as shown.
Torque: 0.5-0.6 Nm
2. Remove the dust cap from the terminal of the meter connector
，
and
connect the meter plug.
5.6.3 WiFi/4G stick connection
1. Take out the WiFi/4G modular included in the scope of delivery.
2. Attach the WiFi modular to the connection port in place and tighten it into
the port by hand with the nut in the modular. Make sure the modular is
securely connected and the label on the modular can be seen.