UM0012_ASW 5-10k Series_EN_V03_0522 27
3. Push the swivel nut up to the thread and tighten the swivel nut. (SW15,
Torque: 2.0Nm).
4. Ensure that the cable is correctly positioned:
Result
Measure
If the stranded wires are visible in
the chamber of the clamping
bracket, the cable is correctly
positioned.
• Proceed to step 5.
If the stranded wires are not
visible in the chamber, the cable is
not correctly positioned.
• Release the clamping bracket. To do
so, insert a flat-blade screwdriver
(blade width: 3.5 mm) into the
clamping bracket and lever it open.
• Remove the cable and go back to
step 2.