manualshive.com logo in svg

Solplanet ASW H-S Series, User Manual, Page: 46 / 97

Share
Download
Solplanet ASW H-S Series User Manual Download Page 46

 

User Manual UM_ASW3000-5000H-S_EN_V01_0321                                                      45 

 

7. Before DC connection, insert the 

DC plug connectors with sealing 
plugs into DC input connectors of 
the inverter to ensure protection 
degree. 

 

6.7.4 Disassembling the DC connectors 

 

1.  nscrew the swivel nut. 

 

                       
 
 

 

Damage to the inverter due to moisture and dust 
penetration 

Seal the unused DC inputs with sealing plugs so that 
moisture and dust cannot penetrate the Inverter. 

• 

Make sure all DC connectors are securely sealed. 

 

 

Danger to life due to high voltages on DC conductors 

When exposed to sunlight, the PV array generates 
dangerous DC voltage which is present in the DC 
conductors. Touching the DC conductors can lead to lethal 
electric shocks. 

• Cover the PV modules.

 

• Do not touch the DC conductors.

 

Summary of Contents for ASW H-S Series


































































































Reviews:

No comments