18 User Manual UM0007_ASW3000-5000H-S_EN_V01_0321
Mounting procedure:
1.
Use a Φ10mm bit to drill 3 holes at a depth of
about 70mm
according to the location of the wall mounting bracket.
2. Insert wall plugs into the wall and fix the wall mounting bracket
Risk of injury due to damaged cables
There may be power cables or other supply lines (e.g. gas or
water) routed in the wall.
• Ensure that no lines are laid in the wall which could be
damaged when drilling holes.
Risk of injury due to the inverter falls down
If the depth and distance of the holes is not correct, the
inverter maybe fall down from the wall.
• Before inserting the wall
anchors, measure the depth and
distance of the holes.