14
8.3 Initial view
When first powering the VASCO Solar, the display shows : release of display software (LCD = X.XX) and the release of
inverter software (INV = X.XX) as shown below:
The following End User messages are displayed by pushing the scroll buttons:
p is the pressure value read by the pressure transducer.
By pressing ENTER the pressure set value is displayed <XXX.X>
V_in is the line voltage.
I is the the absorbed motor current.
cosphi index means the angle phi between the voltage and current absorbed by the
motor
P is the power in Watts supplied to the pump.
NORMAL status means no alarms.
If an alarm occurs, a message blinks on the display and an audible signal is activated.
Pressing ENTER accesses: VASCO Solar lifetime, PUMP lifetime, consumption statistic,
alarm list.
To return to previous views, press ENTER.
First row gives the VASCO Solar status:
x
Inv: ON XXX.X Hz
VASCO Solar is powered and is powering the motor showing its frequency.
x
Inv: ON Mot: OFF
VASCO Solar is powered but motor is not running
x
Inv: OFF Mot: OFF
VASCO Solar is not powered
If COMBO function is activated, the VASCO Solar address is placed close to indication
“Inv”.
XXXXXXXXXXXXXXX
XXXXXXX h : XX m
%f 25 50 75 100
%h XX XX XX XX
Motor Life
xxxxx h : xx m
Inverter Life
xxxxx h : xx m
Inv: ON/OFF Mot: ON/OFF
STATUS: NORMAL
Inv: ON/OFF Mot: ON/OFF
P = XXXXX [W]
Inv: ON/OFF Mot: ON/OFF
cosphi = XXX
Inv: ON/OFF Mot: ON/OFF
I= XX.X [A]
Inv: ON/OFF Mot: ON/OFF
V_in = XXX [Hz]
Inv: ON/OFF Mot: ON/OFF
p = XX.X [bar]
LCD = X.XX
INV = X.XX
