10
Index summary Page
GB
Operating Instructions
1. CE Declaration of conformity
10
2. Introduction
10
3. Operating and functional components 10
4. Safety instructions
11
General safety information
11
When filling the fuel tank
11
Start-up preparations
11
Starting
11
During operation
11
During maintenance and repairs 12
5. Fuel
12
Fuel information
12
Mixture
12
Filling the fuel tank
12
6. Starting the engine/ Stopping the engine 13
Start-up preparations
13
Starting
13
If the engine fails to start
13
Stopping the engine
13
7. Operating and maintenance information 13
General operating information 13
Starting equipment
13
Carburetter adjustment
14
Spark plug information
14
Air filter maintenance
14
Silencer information
14
Decommissioning and storage 15
Maintenance schedule
15
8. Wearing parts
15
9. Specification
16
10. Guarantee
16
2. Introduction
Congratulations on choosing a new SOLO
quality product. We hope you will be satis-
fied with this technically advanced
equipment.
This single cylinder two-stroke engine with
nickel-aluminium-silicon coated cylinder, is
designed for high performance and low
fuel consumption proven SOLO technology
which guarantees you a high level of serv-
iceability.
SOLO is committed to continuing product
development. Appearance, applied technol-
ogy and equipment levels are, therefore,
subject to modification. Any depictions and
details contained within these operating
instructions are non-binding.
Carefully observe the operating and main-
tenance instructions to ensure the function
and performance of your engine over a
long service life.
Your dealer will gladly advise you, should
you have further questions, after carefully
reading these operating instructions.
1. CE Declaration of conformity
in accordance with EC directives 98/37 EC, 2000/14/EC
and 89/336/EWG (amended with 92/31/EWG),
SOLO Kleinmotoren GmbH, Stuttgarter Strasse 41,
D-71069 Sindelfingen, being solely responsible,
states that the product referred to in this
declaration complies with the requirements of
the machinery guidelines.
This Declaration of Conformity will become invalid if
the product is modified, changed or altered without
prior approval.
Sindelfingen, 1
st
January 2003
SOLO Kleinmotoren GmbH
Wolfgang Emmerich
3. Operating and functional components
Fig.1
1
Choke lever
2
Spark plug cap
3
Silencer
4
Filler cap
5
Starter handle
6
Air filter
7
Primer
Please note:
Before initial use, read these operating
instructions carefully and observe all
safety instructions.
