CSE-M53N User Manual Ver. 2.5
Sollae Systems Co., Ltd.
- 35 -
http://www.ezTCP.com
[DNS IP Address] needs when users use host name instead of the IP address.
5.2.2 Examples
A situation that [Event Byte] is set to 0.
Figure 5-4 time chart for a situation that [Event Byte] is set to 0
Points
States
~
Before the power is supplied
①
Sends TCP connection request segment right after it boots up
~
Processes of the disconnection
②
The connection has been established
~
Data communication on both sides
Table 5-7 states of each points
Look at the blue arrow. The data “123” from the serial port had sent before the
connection is established. In this case, the data wasn’t sent because of the [Event Byte] is
set to 0
