Sollae Systems SIG-5600, User Manual

Page: 27 / 43

SIG-5600 User Manual Ver. 1.0
- 26 -
https://www.ezTCP.com
⚫
TCP STATE
Status Description
LISTEN Listen
CLOSED Disconnected
CONNECTED Connected (IP and port of the connected host will be shown)
CONNECTING Connecting
DISCONNECTING Disconnecting
Table 4-2 TCP STATE
⚫
MODBUS STATISTICS
Item Description
RX0~3 Statistics of incoming data from TCP: Query, Error, Discard
TX0~3 Statistics of outgoing data to TCP: Reply, Error
Query Valid frame count from Modbus queries of the master
Error Invalid frame count from Modbus queries of the master;
Modbus frame count failed to send to the master
Discard Discarded frame count from invalid data of the master
Reply Transmitted frame count to the master
Table 4-3 MODBUS STATISTICS
⚫
DEVICE STATISTICS
Item Description
TCP0~3 The byte count of TCP data: TX, RX, DROP
TX The byte count of outgoing TCP data
RX The byte count of incoming TCP data
DROP The byte count of discarded TCP data
AI0~3 Current values of each analog input port (min, max)
DI0~3 Current status of each digital input port (counter value)
DO0~3 Current status of each digital output port
Table 4-4 DEVICE STATISTICS
4.1.3 Timeout
This is the timeout display function that appears in the upper right of the status
window. When this time reaches zero, the connection between spFinder and the product
is lost. The initial value is 30 minutes. If you move the mouse pointer in the
internal area of the status window, the timer is reset to the initial value again.
4.1.4 Copy status
Clicking this button copies all information displayed in the current status window
to the clipboard.