Sollae Systems CSW-H80, User Manual

Page: 46 / 69

CSW-H80 User Manual Ver. 3.0
- 45 -
http://www.ezTCP.com
6.2 Status Monitoring
6.2.1 Using TELNET
When the [TELNET] option is activated, you can remotely log in to CSW-H80. If a
password is set, users should input the password.

Starting with firmware version 2.0A, you can login by entering "sollae" without
setting a password.
After then, messages from CSW-H80 will appear like the following figure.
Figure 6-3 log in to CSW-H80 via TELNET
Followed commands let users check each state.
Command Option Description Usage
st
net Network Status lsh>st net
sio Serial Port Status lsh>st sio
uptime System Uptime lsh>st uptime
sd [OP1][OP2] Serial data Dumping lsh>sd 1 100
sc [OP1][OP2] Session Close lsh>sc com1 close
exit - TELNET Session Close lsh>exit
Table 6-1 commands for checking states

st net
“st net” command displays present network states of all sessions.
Figure 6-4 “st net command”

st sio
“st sio” command displays the number of bytes for the serial port.
Figure 6-5 “st sio” command