CSW-H80 User Manual Ver. 3.0
- 16 -
2.2
Installation
The following instruction is written based on use of evaluation board for CSW-H80.
Before testing CSW-H80, connect the serial port to your PC. And then, make wireless LAN
link between the PC and CSW-H80 using an AP or wireless LAN adaptor.
Figure 2-3 connection between CSW-H80 and a PC
2.2.1 Making Wireless LAN link
Wireless LAN link is not automatically established when you connect the AP or wireless
LAN adapter to your PC. Wireless LAN parameters should be configured on CSW-H80.
Follow the steps below if you are a beginner.
Supplying the Power
Connect the 5V DC adapter to the CSW-H80.
Pressing the Function Button
Press the function button shortly (less than 1 second).
Reading the Setting
Click the [Read] button of [Serial] tab on the ezManager, after opening the connected
COM port.
Figure 2-4 reading the setting