CSW-H80 User Manual Ver. 3.0
- 42 -
Dynamic Update of Peer host
This is a function that CSW-H80 automatically sets its peer host with information of
the last packet received from network. The source address of the packet is set to the
peer host.
Parameters
Values
Peer Address
0 (None)
Peer Port
0
Table 5-14 setting for [dynamic update of peer host] function
Figure 5-10 time chart
Time
States
~
Sending any UDP data to the network is impossible.
①
UDP data has arrived from Remote Host 2.
~
Send UDP data to Remote Host 2.
②
UDP data has arrived from Remote Host 1.
~
Send UDP data to Remote Host 1.
③
UDP data has arrived from Remote Host 2.
~
Send UDP data to Remote Host 2.
Table 5-15 states of each point
The data “ABC”, “DE”, “FGH” are from the serial port of CSW-H80 in the above
figure.
