SOLIS Master Top, Technical Documentation Manual

Page: 36 / 38

M Page 3
4
of 36 SOLIS Ltd
SOLIS-House
CH-8152 Glattbrugg SOLIS MASTER TOP
8_DWA fixt water connection_M_e
29.08.05 B.K.
30.08.05
Brewing unit is blocked (coffee powder residues).
•
Start cleaning program
•
Omit paragraph 2, “Fill water reservoir”).
Coffee is ground too fine
•
See above point
•
If, contrary to expectations, the insufficient water control indicator does not go out,
please take your SOLIS MASTER TOP to an authorised service office (e.g. SOLIS
customer service).
3. Care and maintenance
Please refer to the original user‘s manual, page 17 onwards.
4. Adjusting the “decalcify appliance“ control indicator
7 – 8 dH / 125 – 145 ppm, is the ideal water hardness level for good coffee.
If you use a water softening unit there is no need to decalcify the appliance after 1,500
cups of coffee. The SOLIS MASTER TOP is fitted with a control System which allows you
to adjust the reminder (control indicator flashes) to decalcify the appliance in line with
water hardness. (The hardness of the water can be checked using the test strips enclosed
in the connection set).
Procedure:
•
Switch appliance to stand-by mode.
•
Press the programming switch (7) and the decalcifying switch (6) simultaneously.
•
Press the operating switch (1) at the same time.
•
The appliance is now in programming mode.
•
Program the setting for your water hardness using the quantity se/- (5).
•
Store this setting with the programming switch (7).
Decalcifying indication after
1 = 625 coffees / approx.100 litre > 14 dH > 250 ppm
2 = 1325 coffees / approx. 200 litre 13 – 14 dH 232 – 250 ppm
3 = 2325 coffees / approx. 350 litre 10 – 12 dH 178 – 214 ppm
4 = 4‘500 coffees / approx. 600 litre 7 – 9 dH 125 – 160 ppm
5 = 5‘500 coffees / approx. 750 litre 5 – 7 dH 89 – 125 ppm
6 = disabled ( no decalcifying indication )