Levelogger Series User Guide
Page 57
In the next window, you will choose the Levelogger file(s), Rainlogger file(s), and Barologger file(s) you would
like to use in the compensation. Any files you have open in the Data Control tab will be listed.
Use the directory on the left of the window or click
to open any other data files you would like to
compensate. Ensure the files you want to compensate are highlighted in the list.
If doing a Barometric
Compensation, ensure the Barologger file is highlighted.
Do this by clicking the file name. To de-select a
file, click again. Select Next to continue.
Note:
See Section 8.1.1 for more information on selecting files for Barometric compensation.
Figure 8-6 Selecting Files for Compensation
If you have selected yes to
Parameter Adjustments
, or selected the
Parameter Adjustments Only
option,
in the next window you will enter these.
You can expand the window by clicking “>>” to show additional
adjustment options.
If you did not select to change any parameters, this window will not be shown.
Note:
When adjusting Units for Levelogger files or Rainlogger files, If you select apply to all, the same unit change will
be applied to all of the files being compensated at that time.
Figure 8-7 Parameter Adjustments