3.6 Using phone lines
(land lines and mobiles phones)
3.6.1
General connection diagram to transmit audio using standard telephone lines
3.6.2
Connecting by land line
The telephone line connects to MX2400 to 'LINE'
connector, RJ11 type. MX2400 sent mix program to
the phone line, which is received at the studios; and
receives return signal from studios, that mixes
directly to headphones.
When MX2400 transmits using land lines, you can use the
Bluetooth link to make a second call, that can be send to air.
MX2400 has a DTMF keypad to dial with land lines. To
dial up, proceed:
1.
Take the line pressing the button “PHONE”.
2. Open the knob “STUDIO” to listen in
headphones the dial tone.
3.
Dial the phone number.
4.
To talk, you can use the built-in microphone
(Talk-back), or a microphone connected to the
console (recommended). Both are sent to
studios via land line.
3.6.3
Using a Bluetooth cell phone
MX2400 supports connection of a mobile phone via
Bluetooth. Bluetooth call phone can be used to link
MX2400 to studios, or send a calling on the air (only
when transmit by streaming or land line).
Any phone with Bluetooth can be linked to the
MX2400, avoiding the use of the headset cable,
which differs for each mobile. Bluetooth also allows
that cell phone be located up to 10 meters away from
the console.
The Bluetooth incoming audio is sent to the
program
mix (Channel 6) and to the
headphones
mix
(Blueth). The Bluetooth wireless connection allows
for better audio quality since the signal remains
digital from the remote cell phone to the phone hybrid
located at studios.
3.6.3.1 Linking the cell phone with the MX2400
By linking cell phone to the MX2400 creates a link
between two devices, and allows the phone to
remember the unique ID of the codec-mixer
MX2400. This procedure is made only the first time
that use the cell phone. Once the console and the
cell phone are linked, the console automatically
connects to these mobile when you enables
Bluetooth on both devices.
Procedure:
1.
MX2400:
Enables
discovery mode
. Being
Bluetooth switched off (LED off) press and hold the
button BLUET (5 seconds) until the LED flashes
alternating between green and red, indicating the
discovery mode.
In this condition the MX2400 can be
found by the cell phone.
Remmember: To enable Bluetooth, press and hold the button
BLUET by 2 seconds. Release the button just when LED lights.
Led will flash in green slowly, indicating Bluetooth is on.
If when led lights green you remains hold the BLUET button
more that 2 seconds (5 sec approx) Bluetooth enters changes to
“discovery” mode (toggling green and red).
2.
At the cell phone,
search for Bluetooth devices.
This procedure varies by brand and model, see the
user's manual of the cell phone.
3. When the phone finds the MX2400's, it shows the
code
“BTM751”
on screen. When the phone asks for
the password, enter 0000 (default). See your phone's
user's manual for details.
SOLIDYNE
CODEC–MIXER MX2400
Page 18
