Solidyne MB 2100, User Manual

Page: 4 / 22

All amplifiers used in MB2100 are CMOS technology, ultra-low
power consumption. This design decision makes the console
consumes less than 0.1 watt, ensuring a longer duration to 16
hours continuous operation. With non continuous work is normal
that the battery lasts 20 to 25 hours.
1.1.1 Inputs
•
3 inputs for dynamics microphones , 1/4” TRS
female jack. Non-saturation pre-amplifiers with “local-
feedback” technology by Solidyne.
•
1 line input (mono), compatible with headphone
output of portable players.
•
Built-in condenser microphone (shares the knob with
the line input).
1.1.2 Outputs
The program signal is compressed by an automatic
dynamic range compressor , which maintain a constant
output level.
The outputs are:
•
Main Program Output (PGM). Balanced with TRS
Impedance 10 KOhms.
•
CUE output (monitor) 2 headphone outputs allows to
connect up to 4 headphones of 32 ohms or higher
impedance. This avoids the use of external
amplifiers. A knob allows to change the listen
between the console's output or the return signal
from Studios.
•
RJ11 to cell phone or land line.
1.1.3 Power source
Internal Battery Ni-Cd batteries allowing 16 hours of
continuous operation. They are typically 20 to 25 hours of
non continuous operation.
Included external charger. Multi-voltage, can be connected
indifferently to any voltage between 100 to 240V, 50/60 Hz.
Page 4 MB-2100 Portable mini-console SOLIDYNE