![Solidyne MB 2100 User Manual Download Page 18](http://html1.mh-extra.com/html/solidyne/mb-2100/mb-2100_user-manual_1315650018.webp)
using a microphone and headphone connected to the
console.
The program signal (console output) is sent to the radio
through the telephone. The return from the radio comes to
the MB-2100 and sent to CUE control headphones for
monitoring (position Studio).
Monitoring
The knob 'CUE' is a dual control that allows to listen to the
output of the console (MIXER) or the return from Studios
(STUDIO).
The first option is used when there is no communication
with the radio, to test and adjust the microphones before
making the call. Or when the console is connected to a
portable recorder for recording on location, having no link
with the radio.
STUDIO position is used when establishing a telephone
link with the Studios. The operator of the MB2100 hear the
audio from the radio and your own audio, entering the
console via the telephone.
End the call
To end the notifications sent by land line, press PHONE
button again, the button is discharged. This action will
hang up the communication, except that the phone had
been let down before.
In the case of a
cell phone
, simply end the call using the
phone keypad (see the phone manual, “hands free"
operation).
If the communication interrupts...
Remember that when using the "hands free" option at cell
phone, microphone and speaker of the phone (usually) are
disconnected. If communication is lost, you must remove
the cable from the phone to make the call again.
You can also wait for the Studios call you . As the cell
Page 18
MB-2100 Portable mini-console
SOLIDYNE
Summary of Contents for MB 2100
