Solidyne MB 2100, User Manual

Page: 10 / 22

2.2.2 Connecting to a cell phone
MB-2100/BL (Bluetooth model) supports connection of a
mobile phone via Bluetooth to link to studios.
Any phone with Bluetooth can be linked to the MB-
2100/BL, eliminating dependence on the headset cable,
which differs in each cell.
While the cell may be up to 5 meters away from the
console, we recommend wearing, but not beside to the
console. The shirt pocket, or hang on the waist
opposite side of the console, are appropriate places
The Bluetooth wireless connection allows for better audio
quality as the digital signal remains from the cell to the MB-
2100.
2.2.2.1 Link the cell phone with the console
By linking cell phones to the console creates a link
between two devices, and allows the phone to remember
the unique ID of the console (ID). Do you need to make
this only the first time that use the phone. Once the
console and the phone are linked, the console
automatically connects to these phone when you enables
Bluetooth on both devices.
Procedure:
1. MB-2100: Enables discovery mode . With Bluetooth
switched off (LED off) press and hold the number # and 9
on DTMF keypad (5 seconds) until the LED flashes
alternating between green and red, indicating discovery
mode. Being in this mode the MB-2100 can be found by the
cell phone.

To enable Bluetooth, press and hold the numbers # and 9 on the DTMF
keypad by 2 seconds. Release the buttons just when LED lights. Led will
flash in green slowly, indicating Bluetooth enabled. If you hold BLUET button
more that 2 seconds (5 sec approx) Bluetooth changes to “discovery” mode
(toggling green and red).
2. At the cell phone , search for Bluetooth devices. This
procedure varies by brand and model cell, see the
instruction manual of phone.
Page 10 MB-2100 Portable mini-console SOLIDYNE