Mounting instruction, accessories and advice
The resilience of the attachment points is dependent on the struc-
ture. A well dowelled screw, resp. an adhesive anchor in concrete
can hold 800 kg in comparison to a simple brick wall with 100 – 150
kg (information without warranty).
An adhesive anchor is a screw, resp. a threaded rod that is adhe-
red in the wall with a special adhesive and a dowel. This kind of
attachment holds the best. Further helpful information for the pro-
per attachment on the wall of your house can be found under www.
Fischerwerke.de.
Choose the kind of attachment screws that are best suited for your
underground (concrete, Ytong, brick, wood, etc.).
If you are not sure about the durability of the structure, resp. the sta-
bility of the attachment points, you should urgently get the advice of
a specialist, resp. builder.
Beware: do not insert any screws, resp. adhesive anchors closer
than 10 cm to the end of a brick (corner of the house, window- or
door frame).
For the attachment on the wall of the house use the adapter plate,
resp. the ringbolt (only for very solid underground like concrete) –
also see accessories.
SCHRITT 4 – MONTAGE DER
BEFESTIGUNGSPUNKTE AN WÄNDEN
l
l
l
l
l
l
Advice
Does your house have a thermal insulation? Then use distance pieces
when attaching the adapter plate. These are available in any well as-
sorted iron hardware store. Distance pieces are aluminum, resp. me-
tal tubes that are pushed over the screws and thus ensure a strong
space between the wall and the plasterwork. Choose the length of the
distance pieces so that the attachment plate has a distance of about 1
– 2 cm from the plasterwork. This way you avoid possible abrasion and
damages on the house façade.
7
Stainless steel wall plate
For robust attachment on brickwork
measurement : 15x15 cm
distance of the holes: 11 cm
inner diameter drilling: 12,5 mm
Stainless steel wall plate 25x5 cm
distance of the holes : 6,5 / 9,0 / 6,5 cm
inner diameter drilling: 12,5 mm
Corner wall plate for internal
and external corners
measurement : 15 x 15 x 15 cm
distance of the holes : 11 cm
inner diameter drilling : 12,5 mm
Ringbolt
M8x80 mm, M8x100 mm
for a neat attachment as adhesive anchor
on walls and brickwork. Made of stain-
less steel with closed ring and cover flap.
Wood ringbolt
8x80 mm
for attachment on walls, wood and brick-
work. Made of stainless
steel with closed ring.