11
Dry Printing
1.
Go back to the Main Menu and select Print → select the “calibration block”. Then confirm all
checkboxes (although no resin in the resin container) and press Start.
2.
Do not be afraid the motor will go slower and be really loud when going down below the resin
container top edge. This is normal. The motor will stop once the printing plate is at the floor of
the resin container. The slow speed avoids bubble formation but results in louder operation.
3.
Let it print for a few layers, then pause and abort the print.
Summary of Contents for 2.0
Page 1: ...SOLIDATOR 2 DLP 3D PRINTER USER MANUAL ...
Page 18: ...18 ...
