20
©
SOLIDA SYSTEMS INTERNATIONAL
2016
Figure 6.1 Rule list in the configuration utility.
The column named “Category” shows what rules are Solida system rules and which rules that have
been created by the user.
6.3 Rule Sets
A rule set is a collection of rules. Multiple rule sets can be created, each containing a different set
of rules. The appliance can be activated with one single rule set. Once a rule set has been
activated, the appliance will start its packet scanning using all the rules included in the rule set.
To display and create rule sets, start the configuration utility and navigate to “Rule Sets”. This will
show a list over all available rule sets.
Figure 6.2 Rule set list in the GUI configuration utility.
6.4 Activating a Rule Set
To activate a rule set, select the rule set by clicking on its row in the GUI. Then click the “Activate
Ruleset” button. This will perform an implicit sanity check of all the included rules, and then
upload these rules to the appliance.
Once this activation completes, the appliance will start using the new rules immediately.
