SDI – User Guide Page 13
PHD
For future use.
Dante
It is recommended that these settings are managed using the
Dante controller
application only and not via SDI Manager.
The information relating to the interface is included for clarity.
See page16 for information relating to Dante Controller.
Optional Module (MADI SFP Fibre)
Each of the SFP fibre MADI interfaces, SFP 1 and SFP 2, has its own settings pane.
➭
Interface Type
should be set to Madi – hotlink is not supported.
➭
Input Sample Rate
can be determined automatically from the incoming
signal or locked to the internal clock.
➭
Output Frame Rate
sets the frame rate of the MADI signal (for use at 96kHz):
• High – 96kHz framing pattern
• Legacy – 48kHz framing pattern
➭
Output Channel Status
controls user-bit data handling:
• Transparent – Provides pass-through of user bits
• Default – Removes user bits
➭
Output Channel Count
– Select 56- or 64-channels.
