V
V-
-P
Po
ot
t
M
Mo
od
de
es
s
The channel V-Pots can function in a number of different ways, as controlled by the V-Pot mode keys mapped to the soft keys in
the DAW Profile assigned to the current layer. Each of the default Profile contains a full set of V-Pot mode keys mapped to the
default soft key set. These master keys allow the V-Pots to control a variety of workstation console functions including panning,
sends and plug-in parameters. When using the MCU protocol, the 2-digit
Mode
display next to the timeline counter provides
additional user feedback on V-Pot modes.
V-Pot mode functionality will be fully described in the control surface documentation supplied with the DAW.
Each V-Pot is surrounded by a circular 11 segment parameter value indicator with a red LED immediately underneath the V-Pot to indicate default
value settings or the state of the integral V-Pot switch. Full information will be found the DAW control surface documentation.
As well as the modes defined by the DAW protocol, Matrix offers
additional V-Pot functionality via the four console
V-POT MODES
keys, located above the Utility and Navigation areas of the Matrix
centre section. Each of these buttons lights to indicate when they
are active, with normal operation indicated when no lights are on.
Flip Mode
The
FLIP
button sends the MCU Flip command or the HUI Shift command, allowing certain function on the V-Pots to be
controlled by the faders. In Pro Tools, the
FLIP
function allows send levels to be controlled from the channel faders with the
channel V-Pot,
CUT
and
SOLO
buttons controlling additional send functions, including panning on stereo sends and the send mute
function. The send slot being controlled is displayed in the top row of the digital scribble strip.
When controlling a DAW via the MCU protocol, the
FLIP
function interchanges or duplicates most V-Pot parameters on to the
faders including plug-ins and Instruments – full details will be found in your DAW control surface documentation.
IN-Line Mode
IN-LINE
assigns the V-Pot to control either the analogue channel output level or the DAW track level depending on the current
console Focus mode, replacing the current function assigned to the V-Pot: In DAW Focus mode, the channel fader controls the
DAW track level and the V-Pot the analogue channel level, whereas in Analogue Focus mode, the channel fader controls the
analogue channel level and the V-Pot controls the DAW track level.
With
IN-LINE
mode enabled, the top row of the digital scribble strip contains the fader labels and the bottom row the V-Pot
labels. With neither
V-SOLO
nor
V-MUTE
active, the V-Sel button swaps the function of the fader and V-Pot within that
channel. This swap is indicated by the Track and Channel labels reversing position.
The last two
V-POT MODE
keys determine the function of the V-Sel switches when
IN-LINE
is active. The channel
CUT
and
SOLO
buttons are always linked to the channel fader, whether it is in Analogue or DAW Focus mode. If
V-SOLO
is selected,
the V-Sel switch becomes the solo button for the signal, which is being controlled by the V-Pot. Similarly, if
V-MUTE
is selected,
the V-Sel switch becomes the mute switch for the signal which is being controlled by the V-Pot. In either mode, the red LED
beneath the V-Pot lights to indicate that the
V-SOLO
or
V-MUTE
function has been activated.
V-MUTE
and
V-SOLO
intercancel. A second press on the active mode swich returns the V-Sel switches to channel swap
function.
iJack
iJack
CUT
DIM
i
n
2
2
62
81
1
0
0
1
1
2
2
3
3
4
4
5
5
6
6
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
10
20
30
40
50
5
0
5
10
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
2
3
4
5
6
7
8
1
10
11
12
13
14
15
16
9
MASTER/FOCUS
REC
MON
SOLO
MIX
LEFT
RIGHT
REC
MON
SOLO
MIX
SolidStateLogic
Matrix
STEF19/05/08
in
2
2
62
81
1
CUT
DIM
ARTIST
20
30
40
50
60
15
10
5
0
10
20
30
40
50
5
0
5
10
ARTIST
t 2 :: T
Projec
itle
Me e
t rs
Mon
Auto
TR
IP
Misc
Bass
t 2: : t
projec
ittle
meters
mon
auto
tr
ip
misc
Chapter 5 - DAW Control
66
Matrix Owner’s Manual
Summary of Contents for Matrix
