Solid State Logic Matrix 2 Owner'S Manual Download Page 64

Page: 64 / 170

Managing Projects

Creating a Project

To create a new Project, simply press the ‘

New Project

’ button in the bottom left-hand corner of the window. The following

window will appear asking to name the Project and the first Title.

Backing Up a Project

To back up a Project or export it for use in another Matrix Remote, right-click (Mac: ctrl+click) on the Project you wish to back
up and select

Backup Project

. In the pop-up which appears, edit the name and destination of the file if necessary, and press

Save

. Your Project will be exported as a ZIP file.

Restoring a Project

To restore a Project from back-up or import a Project created in another Matrix Remote, right-click (Mac: ctrl+click) on the main

Projects

folder and select

Restore Project

. In the pop-up which appears, locate the Project zip file you wish to restore and

press

Open

. The restored Project will appear in the main Projects folder, with its filename appended with ‘

(Restored)

’ to

distinguish it from any parent Project of the same name. You can now rename the Project as described below.

Renaming a Project

To name a Project, select the Project which you wish to rename, and make one of its Titles the Current Title. You can now edit
Project name and other details in the

Notes

area in the right hand side of the window. Once you have finished, press

Save Notes

(located below the

Title

area) to save your changes.

Pressing

Undo

will bring up a pop-up warning that you will lose unsaved changes if you continue. Click

Yes

to revert the text

to its last saved state.

To name a Project without making it current, select the appropriate Project folder and press the

Rename

button at the bottom

of the window. Alternatively, right click (Mac: ctrl+click) on the folder and select

Rename

from the drop-down menu. This will

produce the

New Name

pop-up. Type the Project name, and click

Deleting a Project

To delete a Project, right click (Mac: ctrl+click) on the folder and select

Delete

from the drop-down menu. Click OK in the

Confirm Delete

pop-up to delete the Project.

Please be aware that this action cannot be undone.

Chapter 4 - Matrix Remote

Matrix

Owner’s Manual

Summary of Contents for Matrix 2











































































































































































Search results

Summary of Contents for Matrix 2

Reviews:

Related manuals for Matrix 2

Brands by name

Popular brands

Solid State Logic Matrix 2, Owner'S Manual

Search results

Summary of Contents for Matrix 2

Reviews:

Related manuals for Matrix 2

Brands by name

Popular brands