Chapter 4 - Matrix Remote
67
Matrix
2
Owner’s Manual
The Insert Matrix Tab
The
Insert Matrix
tab of is the fourth tab in the Matrix Remote. This allows you to route external signal processing to your
channel insert points.
See Chapter 1 for details of connecting up your external signal processing to the Insert Matrix sends and returns.
Note that the Insert Matrix only routes Devices within the channel insert points, and is isolated from the bus insert points.
Naming Devices
The Devices column on the right-hand side of the
Insert Matrix
tab lists the 16 devices available to you, with the default
labelling,
Insert 1
to
Insert 16
. You can rename the Devices inside the Remote by right-clicking (Mac: ctrl+click) on the Device’s
insert number and pressing
Rename
in the drop-down which appears. Type the name you wish to give that unit in the
New
Name
pop-up appears and press
OK
.
The Device number which preceed the name refers to the DEVICE SEND and RTN input and output to which the Device is
connected.
Note that Matrix allows you to name different Devices with exactly the same name, in which case the Devices can be
distinguished using the Device number.
Note also that if you attempt to save a blank Device name, the Remote will return the Device to its default name, ‘
Insert
n
’ where ‘
n
’ is the Device number.