Solid State Logic AWS DELTA 916, Owner'S Manual, Page: 37 / 239

N
ETWORK
T
ROUBLESHOOTING
Most Ethernet adaptor cards have two LEDs associated with each port. The one indicates that the link is connected and
the other indicates network traffic. Please note that some Macintosh computers do not have external LEDs to indicate
status. Instead the link status is shown in the System Preferences/Network menu.
On your host workstation computer, confirm that the link LED is permanently illuminated. If it is not permanently
illuminated, it suggests you have a cabling error. In this instance please check the following:
• The RJ45 network connector on the console and on your workstation are fully inserted.
• If you are using a pin-pin cable to make a direct connection between your console and workstation, try replacing it
with a crossover cable.
• Try replacing the network cable.
• If you are not using a direct connection between your console and workstation using the default fixed IP address on
the console, please try this simple configuration to rule out issues with external routers and network switches. If the
link LED is illuminated, the next step is to confirm that the activity LED is illuminating periodically to show network
traffic. If it does not illuminate periodically check the following:
• If your workstation is not connected directly to your console using a crossover RJ45 cable and fixed IP addressing,
follow the installation instructions to configure this simple network configuration to rule out issues with any external
routers or network switches.
• Using the fixed default IP address on the console, check that the workstation has basic communications using ‘ping’:
Windows:
Select
Run under the Start menu. In the resulting window enter cmd to launch the command prompt. In the
command prompt window type ping 192.168.1.2
Macintosh OSX:
Open a Finder window, select Applications, then Utilities, and double-click on
Terminal . In the terminal window
enter ping –c4 192.168.1.2
In both cases your host computer will try to establish communications with your console. In the resultant terminal
text, check that the console responded to every message sent by your workstation.
DAW Connection
AWS
δ
elta Owner’s Manual Page 1-15