Solid State Logic AWS DELTA 916 Owner'S Manual Download Page 131

Page: 131 / 239

HUI A

UTOMATION

The AWS’s touch sensitive moving faders can be used to write automation for the DAW fader. Most automation functions

can be enabled from the soft key matrix below the console’s display screen. Within this are menus for Automation Enables,

Automation Modes, Grouping and Editing functions.

Note: Automation data can usually only be written when the DAW is in Play, Half-Speed Play or Record.

UTOMATION

NABLES

Automation Enable modes (

AuEn

) globally engage or disengage automation for the following items: Faders, Pans, Plug-Ins,

Cuts (

Mute

), Sends and Send Muting (

SnMute

). Holding down the

OPTION

button then pressing any of the sub menu

buttons will toggle automation on or off for all controls.
The

Pan

automation enable includes both Channel and Send Pan.

UTOMATION

ODES

There are several Automation Modes (

AuMo

) available including: Write, Touch, Latch, Trim, Read and Off.

To change automation mode on a channel select an automation mode from the soft key menu and press the auto button

on a channel fader. Holding down

OPTION

then selecting an automation mode from below the TFT screen will change

automation modes on all channels. Changes within the DAW will be reflected on the console.

Refer to your DAW manual for more information on its specific automation features.

UTOMATION

TATUS

ISPLAY

Pressing and holding the auto button to the left of a channel fader will display the current

automation mode for that channel in the channel scribble strip display. To display the automation

mode on all channels select the Status Group (StGr) soft menu, and press Auto.
The automation LED indications are as follows:

No LED

Automation off

Green LED

Read automation mode

Red Flashing LED

DAW is ready to write automation in write, touch or latch modes.

Red solid LED

Writing automation data

Red and Green LEDs Trim automation mode

DAW Control

AWS

elta

Owner’s Manual

Page 4-27

Summary of Contents for AWS DELTA 916
















































































































































































































































Search results

Summary of Contents for AWS DELTA 916

Reviews:

Solid State Logic AWS DELTA 916, Owner'S Manual, Page: 131 / 239

Search results

Summary of Contents for AWS DELTA 916

Reviews: