Solid State Logic AWS DELTA 916 Owner'S Manual Download Page 179

Page: 179 / 239

Workstation Setup – Pro Tools

Before mixing with the plug-in the following options should be enabled in the Pro Tools

Setup

Preferences

Mixing

menu :

1. Plug-in Controls Default to

Auto-Enabled

–

Otherwise the parameters will need to be manually enabled for automation

from each individual plug-in window either manually or using the Command-Option-Control-click (MAC) or Control-Alt-Start-click

(PC) short cut.

2. Latching Behaviour for Switch Controls in “

Touch

” –

This ensure that console switch automation is recorded correctly when

the track automation mode is set to Touch.

3. Set the SSL

-Ctrl Plug-in as a ‘

Favourite

’ by Command-click (Mac) or Control-click (PC) the

Insert Selector

and

then selecting the SSL plug-in from the

Other

category. It will then appear at the top of the Insert Selector pop-up

menu for fast access.

If the desk small screen timecode display is required:

1. In the

Setup

Peripherals

Synchronization

menu set

MTC Generator port

to ipMIDI channel

2. In the

Setup

Peripherals

Machine Control

menu enable

MIDI Machine Control(Master)

and set the

port to ipMIDI channel

For the MMC Locate message to update the desk timecode readout the following options should be enabled in the Pro Tools

Setup

Preferences

Synchronization

menu:

1. Machine Chases Memory Location.
2. Machine follows Edit Insertion/Scrub.

Automation

AWS

elta

Operator’s Manual

Page 7-5

Summary of Contents for AWS DELTA 916
















































































































































































































































Search results

Summary of Contents for AWS DELTA 916

Reviews:

Solid State Logic AWS DELTA 916, Owner'S Manual, Page: 179 / 239

Search results

Summary of Contents for AWS DELTA 916

Reviews: